134 2-2 . Charging
When DC charging cannot be performed normally
■ DC charging does not start Likely cause
The DC charging connector is not properly connected to the vehicle .
The DC charging connector is not securely locked .
Error is detected by the DC charger or vehicle ’ s system check .
The DC charger power goes off .
Traction battery is already fully charged
AC charging connector is also connected .
Correction procedure
Check the connection status of the DC charging connector and be sure that it is locked .
If the DC charging does not start , even though the DC charging connector is securely connected , there may be a malfunction with the DC charger or charging system .
• If there is a malfunction with the DC charger , contact the charging station manager .
• If there is not a malfunction with the DC charger , there may be a malfunction in the system . Contact your SUBARU dealer .
There may be a malfunction with the DC charger or charging system .
• If there is a malfunction with the DC charger , contact the charging station manager .
• If there is not a malfunction with the DC charger , there may be a malfunction in the system . Contact your SUBARU dealer .
• If the EV system can not be started , contact your SUBARU dealer .
Contact the charging station manager and check the power status .
When the traction battery is fully charged , DC charging cannot be performed .
DC charging and AC charging can not be performed together .