2-2 . Charging
117
Using the charging schedule function
AC charging can be carried out at the desired time by registering the charging schedule .
■ Calendar settings Charging schedule is performed according to the date and time shown on the multi-information display . Refer to the multi-information display manual for settings .
If the calendar settings check screen is displayed when an attempt was made to register a
charge schedule , check that the correct date is set . If it is incorrect , be sure to correct it .
If the calendar information is wrong , the charging schedule function will not operate normally .
Settings of the charging schedule function
When registering the charging schedule , the following settings can be changed .
■ Select the charging mode
One of the two following charging modes can be selected .
� “ Start ”
Starts charging at the set time * and finishes charging when fully charged .
� “ Start-Stop ” AC charging is performed according to the set start time and stop time . * * : There might be a slight error in
the timing when charging starts due to the state of the traction battery .
■ Repeated setting
The periodic charging schedule can be set by selecting your desired day of the week . Select one or more day of the week to do the charging schedule .
■ Turning “ Charge Now ” on and off
To start charging without changing the charging schedule setting , turn “ Charge Now ” on to temporarily cancel the charging schedule and enable charging after connecting the AC
charging connector . * * : If the charging connector is
removed while the charging schedule is registered and “ Charge Now ” is on , “ Charge Now ” turns off .
■ “ Next Event ”
Of the registered charging schedules , the closest charging schedule after the current time is called the “ Next Event ”.
For charging schedule , AC charging will be performed according to the Next Event .
2
Electric Vehicle system