118 2-2 . Charging
Registering the charging schedule
The charging schedule can be registered on the multi-information display or multimedia .
• Multi-information display operation : �P . 119
• Multimedia operation : �P . 123
■ Charging schedule function
●The charging schedule cannot be set while driving .
●A maximum of 15 charging schedules can be registered .
If the charging mode is set to “ Start- Stop ” and the start time and end
time are set to the same time , charging will be performed for 24 hours from the start time .
The charging schedule function can not be used when using DC
charging .
■ To make sure that the charging schedule function operates correctly
Check the following items . ●Adjust the clock to the correct time
( �P . 158 )
●The calendar is set to the correct date ( �P . 158 )
●Check that the power switch is turned off
●After registering the charging schedule , connect the AC charging connector
The charging start time is determined based on the charging schedule at the time that the AC charging connector was connected .
● Connect the AC charging connector before the start time
When the charging mode is set to “ Start ”, if you connect the AC charging connector after the set start time , the next charging schedule will be referenced .
When the charging mode is “ Start- Stop ”, if you connect the AC charging connector after the start time , charging will start immediately and charging will be performed until the stop time .
●After connecting the AC charging connector , check that the charging indicator of the charging port flashes ( �P . 86 )
●Do not use an outlet that has a
power cut off function ( including a charging schedule function )
Use an outlet that constantly supplies electricity . For outlets where the power is cut off due to a charging schedule function , etc ., charging may not be carried out according to plan if the power is cut off during the set time .
■ When the AC charging connector remains connected to the vehicle
●When the charging mode is set to “ Start ”, even if multiple consecutive charging schedules are registered , the next charge will not be carried out according to the charging schedule until the AC charging connector is removed and reconnected after charging
completes . Also , when the traction battery is fully charged , charging