108 2-2 . Charging
■ Protection function of AC charging inlet overheating
By installing a temperature sensor to the AC charging inlet , prevents parts from melting when the temperature rises due to foreign matter entering the charging connector .
When a certain temperature increase is detected , charging is stopped immediately .
After this , when the power switch is off , a message will be displayed on
the multi-information display ( �P . 140 )
WARNING
■ When charging
Observe the following precautions .
Failure to do so may cause an unexpected accident , resulting in death or serious injury .
●Connect to a power source suitable for charging . ( �P . 95 )
●Check that the AC charging cable , plug and outlet are free of foreign matter .
●Before charging , check that the AC charging inlet is not deformed , damaged or corroded , and check that the inlet is free of foreign matter such as dirt , snow and ice .
If there is dirt or dust in these areas , remove completely before inserting the charging
connector .
●Only use outlets where the plug can be securely inserted .
●Do not bundle or wind the AC charging cable while charging , as doing so may result in overheating .
●Do not touch the terminals of the charging connector and AC charging inlet with a sharp metal objects ( needles , etc .,) or hands , or short them with foreign objects .
●When charging outdoors , make sure to connect to a weatherproof outlet for outdoor use .
Ensure the weatherproof outlet cover closes completely . If the weatherproof outlet cover cannot be closed , install a weatherproof outlet cover that will close .
●In order to stop charging at the charging station , follow the
instructions of the charger .
●If any heat , smoke , odors , noise or other abnormalities are noticed during charging , stop charging immediately .
●Do not insert the plug if the outlet is submerged in water or snow .
●When charging while it is raining
or snowing , do not connect or disconnect the plug if your hands are wet . Also , do not get
the plug or outlet wet .
●Do not charge the vehicle during a lightning storm .
●Prevent the AC charging cable from being caught in the door or
back door .
●Do not let the wheels on the AC charging cable , plug , charging connector and CCID ( Charging
Circuit Interrupting Device ).
●Firmly insert the plug into the outlet .
●Do not use an extension cord and converting adaptor .