7-3 . Do-it-yourself maintenance
481
■ Setting by selecting a specified tire inflation pressure
1 Start the EV system ( �P . 231 )
After setting the tire inflation pressure , a message indicating that setting has been completed will be displayed on the multi-information display .
The tire inflation pressure cannot be set while the vehicle is moving .
2 Press or of the meter control switches and select
.
3 Press or of the meter control switches and select “ Vehicle Settings ”, and then press and hold the “ OK ”.
4 Press or of the meter control switches and select “ TPWS Setting ”, and then press “ OK ”.
5 Press or of the meter control switches and select “ Tire Pressure Setting ”, and then press “ OK ”.
6 Press or of the meter control switches and select “ Setting by Specified Pressure ”, and then press “ OK ”. Select the desired front and rear tire pressures .
7 Press or of the meter control switches and select “ OK ”, and then press “ OK ”. The tire pressure warning light will slowly blink 3 times and a message indicating that tire inflation pressure
is being set will be displayed on the multi-information display .
“ Setting Pressure Wait a Moment ”
■ Setting using the current tire inflation pressure
1 Adjust the tire inflation pressure to the specified cold tire inflation pressure level .
Make sure to adjust the tire pressure to the specified cold tire inflation pressure level . The tire pressure warning system will operate based on this pressure level .
2 Start the EV system ( �P . 231 )
The tire inflation pressure cannot be set while the vehicle is moving .
3 Press or of the meter control switches and select
.
4 Press or of the meter control switches and select “ Vehicle Settings ”, and then press and hold the “ OK ”.
7
Maintenance and care