480 7-3 . Do-it-yourself maintenance more , park the vehicle in a safe place for approximately 15 minutes and then drive the vehicle again .
■ When performing wheel position registration
● Normally , wheel position registration can be completed within approximately 30 minutes .
● Wheel position registration is performed while driving at a vehicle speed of approximately 25 mph
( 40 km / h ) or more .
■ The initialization operation
●If the power switch is turned off while registering the wheel position , the next time the power switch is turned to ON , the wheel
position registration will resume and it will not be necessary to restart the procedure .
●While the position of each tire is being determined and the inflation
pressures are not being displayed on the multi-information display , if the inflation pressure of a tire
drops , the tire pressure warning light will come on .
■ If the tire pressure warning system is not registered properly
●In the following situations , wheel position registration may take longer than usual to be completed or may not be possible .
• Vehicle is not driven at approximately 25 mph ( 40 km / h ) or more
• Vehicle is driven on unpaved roads
If initialization does not complete after driving for 1 hour or more , park the vehicle in a safe place for approximately 15 minutes and then drive the vehicle again .
●If the vehicle is reversed during wheel position registration , all data collected until then will be cleared . Perform driving again .
Setting the tire pressure
■ When you need to setting the tire pressure
In the following situations , it will be necessary to perform the tire inflation pressure setting procedure of the tire pressure warning system .
• When the specified tire inflation pressure has changed , such as due to carried load , etc .
• When the tire inflation pressure is changed such as when the tire size is changed .
If the tire inflation pressure has been adjusted to the specified level , perform the tire inflation setting procedure by selecting specified inflation pressure on the multi-information display .
When the tire inflation pressure is to be other than specified , such as when tires other than the specified size are used , etc ., set the tire inflation pressure using the current pressure . Make sure to adjust the tire inflation pressure of each tire to the appropriate level before performing tire pressure setting . The tire pressure warning system operates based on this tire inflation pressure .