446 6-4 . Using the other interior features
sequence ( press / hold / release ) up to 3 times to complete programming . If the garage door opener motor operates when the
HomeLink ® button is pressed , the garage door opener motor recognizes the
HomeLink ® signal .
■ Enabling 2-way communication with a garage door ( only available for compatible devices )
When enabled , 2-way communication allows you to check the status of the opening and closing of a garage door through indicators in your vehicle .
2-way communication is only available if the garage door opener motor used is a compatible device . ( To check device compatibility , refer to www . homelink . com .) 1 Within 5 seconds after programming the garage door opener has been completed , if the garage door opener motor is trained to Home-
Link ® , both garage door operation indicators will flash rapidly ( green ) and the light on the garage door opener motor will blink twice , indicating that 2-way communication is enabled .
If the indicators do not flash , perform 2 and 3 within the first 10
presses of the HomeLink ® button after programming has been completed .
2 Press a programmed Home-
Link ® button to operate a garage door .
3 Within 1 minute of pressing
the HomeLink ® button , after the garage door operation has stopped , press the “ Learn ” or “ Smart ” button on the garage door opener motor . Within 5 seconds of the establishment of 2-way communication with the garage door opener , both garage door operation indicators in the vehicle will flash rapidly ( green ) and the light on the garage door opener motor will blink twice , indicating that 2-way communication is enabled .
■ Reprogramming a single HomeLink ® button
When the following procedure is performed , buttons which already have devices registered to them can be overwritten :