6-4 . Using the other interior features
447
1 Press and hold the desired HomeLink ® button .
2 When the HomeLink ® indicator starts flashing orange ,
release the HomeLink ® button and perform “ Programming HomeLink ® ” 1 ( it takes 20 seconds for the Home-
Link ® indicator to start flashing ).
Opening Closing
� Vehicles with Digital inner mirror
■ Before programming
●Install a new battery in the transmitter .
●The battery side of the transmitter must be pointed away from the
HomeLink ® buttons .
Operating HomeLink ®
Press the appropriate Home-
Link ® button . The HomeLink ® indicator light should turn on .
The status of the opening and closing of a garage door is shown by the garage door operation indicators .
� Vehicles with auto anti-glare inside rear view mirror
Opening Closing
This function is only available if the garage door opener motor used is a compatible device . ( To check device compatibility , refer to www . homelink . com .)
Color
Orange ( flashing )
Green
Red ( flashing )
Status
Currently opening / closing
Opening / closing has completed
Feedback signals cannot be received
The indicators can operate within approximately 820 ft . ( 250 m ) of the garage door . However , if there are obstructions between the garage door and the vehicle , such as houses and trees , feedback signals from the garage door may not be received .
6
Interior features