558
Replacing Bulbs
it counterclockwise.
6. Pull the bulb out of the bulb holder and replace it with a new one.
7. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks.
the clips, refer to“ Type C clips” FP522.
8. Reinstall the rear combination light assembly by sliding the two-pronged part of the combination light assembly securely to each holder of the vehicle side.
9. Tighten the upper and lower screws. 10. Reinstall the side cover.
! Outback / Subaru Outback Wilderness s11be0502
2. Remove the side cover.
1. Undo the clips. For the method to undo
3. Remove the upper and lower screws.