Front Seats 37 |
||||||||||||
! Registration of the reverse tiltdown mirror angle with the key fob s01aa020707 |
CAUTION
Depress the brake pedal when registering the reverse tilt-down mirror angle.
1. Move the select lever to the“ R” position, then the outside mirror angle will move to the reverse tilt-down position.
2. Adjust the outside mirror angle. For details about the settings, refer to“ Remote control mirror switch” FP301.
3. Move the select lever to the“ P” position, then the outside mirror angle will return to its original position.
4. Turn the ignition switch to the“ OFF”/“ LOCK” position.
5. Hold the access key fob and press and hold the“ SET” button, then press the“” button of the access key fob.
A chirp will sound once, and the reverse tilt-down mirror angle will be registered.
|
NOTE
. The outside mirror angle will return to its original position approximately 9 seconds after the select lever is moved to any position other than“ R” position.
. The factory setting( default setting) for this function is set as the front passenger’ s side mirror. The setting of the driver’ s side mirror operation can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.
. The system stores the adjusted mirror angle for approximately 45 seconds after the ignition switch is turned to the“ OFF” position. Register the mirror angle while the memory function is available.
|
! Utilizing of memory position registered with button“ 1” or“ 2” s01aa020702
WARNING
Be sure to press the correct button to retrieve your registered memory position. If the seat position is not optimum for you, it may adversely affect your driving and may reduce the effectiveness of the seatbelt. That could result in an accident
|
involving serious injury or death. |
1. Turn the ignition switch to the“ ON” position.
2. Put the select lever is in the“ P” position and apply the parking brake. Then press button“ 1” or“ 2”.
A chirp will sound and the seat and angle of the outside mirrors moves to the registered position.
When the select lever is moved to the“ R” position, the outside mirror will move to the registered reverse tilt-down position.
NOTE
. If the vehicle battery is removed, the registered memory position data will not be deleted.
|
1
Seat, Seatbelt and SRS Airbags
|
||||||
– CONTINUED – |