38
Front Seats
. When the button “ 1 ” or “ 2 ” is pressed within 45 seconds after the driver ’ s door is opened , the registered memory position can be retrieved even if the ignition switch is in the “ LOCK ” or “ OFF ” position .
. If buttons “ 1 ” and “ 2 ” are pressed at the same time , execution of seat position retrieval may not be possible .
. When the retrieved position is the same as the current seat position , a chirp will sound twice .
! Utilizing of the seat position registered with access key fob s01aa020704
1 . Hold the registered access key fob .
2 . Unlock the driver ’ s door by pressing the “ ” button or gripping the door handle . 3 . Open the driver ’ s door .
A chirp sounds and the seat moves to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. If the registered seat position cannot be retrieved after performing the previous procedures , try the following procedures . ( 1 ) Press the “ SET ” button on the driver ’ s door .
( 2 ) Press the “ ” button on the access key fob or touch the door lock sensor to lock the doors .
( 3 ) Perform the prior procedures again .
. If the keyless access function is disabled , the seat position cannot be retrieved by gripping the driver ’ s door handle . However , the seat position can still be retrieved by pressing the “ ” button on the access key fob . For information about how to enable / disable the keyless access function , refer to “ Disabling Keyless Access Function ” FP131 .
. If a new position is registered for the same access key fob , the previously registered seat position is deleted .
. If you are carrying 2 or more access keys , seat position retrieval may not be possible .
! Clearing the registered seat position with access key fob s01aa020705
1 . Close the driver ’ s door .
2 . While holding the access key fob and pressing the “ SET ” button , press the “ ” button on the access key fob .
A chirp will sound , and the registered seat position will be cleared .
NOTE
After deleting the seat position , wait for a few moments before registering a new seat position .
& Head Restraint Adjustment s01aa04
WARNING
. Never drive the vehicle with the head restraints removed because they are designed to reduce the risk of serious neck injury in the event that the vehicle is struck from the rear . Also , never install the head restraints backwards .