182
Illumination Brightness Control
NOTE
. When the control dial is turned fully upward, the illumination brightness becomes the maximum and the automatic dimming function does not work at all.
. The brightness setting is not canceled even when the ignition switch is turned to the“ LOCK”/“ OFF” position.
. The operation method of illumination brightness will differ depending whether or not“ Brightness Dial” in the center information display is on. Refer to the operation method indicated the following table.
“ Brightness Dial” is on.
Operational item
Combination meter
Center information display
Control dial Available Available
“ Brightness”* 1 on the center information display
Not available
“ Brightness Dial” is off.
Operational item
Not available
Combination meter
Control dial Available
“ Brightness” on the center information display
Not available
Center information display
Not available
Available
* 1: When“ Brightness Dial” is on,“ Brightness” on the center information display is not available. For details about“ Brightness Dial” on / off settings, refer to“ General settings” FP227( 11.6-inch display models) or“ General settings” FP245( dual 7.0- inch display models).
& Auto Dimmer Cancel Function s03aj01
When the ambient light is bright, the illumination brightness is set to the maximum regardless of the position of the control dial. In this case, you cannot adjust the illumination brightness by using the control dial. When the ambient light is dark, you can dim the illumination brightness as described above.
The operational / non-operational setting and sensitivity of the auto dimmer cancel function can be changed by your SUBARU dealer. Contact your SUBARU dealer for details.