294
Mirrors
pressed and released .
9 . “ Program Success ”: If the programmed HomeLink button works , select “ Yes ” and programming is completed . If the programmed HomeLink button does not work , select “ No ” and proceed to step 10 .
1 “ Learn ” button
10 . At the garage door opener motor , ( security gate motor , etc .) locate the “ Learn ”, “ Smart ”, or “ Program ” button . This can usually be found where the hanging antenna wire is attached to the motor-head unit ( see the device ’ s manual to identify this button ). The name and color of the button may vary by manufacturer .
NOTE
A ladder and / or second person may simplify the following steps .
11 . Firmly press and release the “ Learn ”, “ Smart ”, or “ Program ” button . You now have 30 seconds in which to complete step 12 .
12 . Return to the vehicle and press the HomeLink left button .
13 . Firmly press the HomeLink left button 3 times . At this point , your device should operate when the HomeLink button is pressed and released .
14 . “ Program Success ”: If the programmed HomeLink button works , select “ Yes ” and programming is completed .
In the event that there are still programming difficulties or questions , additional HomeLink information and programming videos can be found at www . HomeLink . com / Subaru and www . youtube . com / HomeLinkGentex . For Genie and Sommer garage door openers , please go directly to the HomeLink web-