Subaru Outback Manuals 2020 Outback Owner's Manual | Seite 44

36
Front Seats
! Utilizing of the seat position
registered with access key fob
s01aa020704
1. Hold the registered access key fob.
2. Unlock the driver’s door by pressing
the “ ” button or gripping the door handle.
3. Open the driver’s door.
A chirp sounds and the seat moves to the
registered position.
When the select lever is moved to the “R”
position, the outside mirror will move to the
registered reverse tilt-down position.
NOTE
. If the registered seat position cannot
be retrieved after performing the previous
procedures, try the following
procedures.
(1) Press the “SET” button on the
driver’s door.
(2) Press the “ ” button on the
access key fob or touch the door
lock sensor to lock the doors.
(3) Perform the prior procedures
again.
. If the keyless access function is
disabled, the seat position cannot be
retrieved by gripping the driver’s door
handle. However, the seat position can
still be retrieved by pressing the “ ”
button on the access key fob. For
information about how to enable/disable
the keyless access function, refer
to “Disabling Keyless Access Function”
☞P125.
. If a new position is registered for the
same access key fob, the previously
registered seat position is deleted.
! Clearing the registered seat position
with access key fob
s01aa020705
1. Close the driver’s door.
2. While holding the access key fob and
pressing the “SET” button, press the “ ”
button on the access key fob.
A chirp will sound, and the registered seat
position will be cleared.
& Head Restraint Adjustment
s01aa04
WARNING
. Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Also, never install
the head restraints the opposite
way round. Doing so will prevent
the head restraints from functioning
as intended. Therefore, when
you remove the head restraints,
you must reinstall all head restraints
correctly to protect vehicle
occupants.
. All occupants, including the driver,
should not operate a vehicle
or sit in a vehicle’s seat until the
head restraints are placed in their
proper positions in order to minimize
the risk of neck injury in the
event of a crash.
. The front seat head restraints are
designed to be installed into the
front seats only. The rear seat