Subaru Outback Manuals 2013 EyeSight® Driving Assist System Manual | Page 72

List of buzzer sounds Buzzer sound Status Single continuous beep Pre-Collision Braking System Second Braking is active. Adaptive Cruise Control or Conventional Cruise Control is canceled. The Electronic Parking Brake was automatically applied during stay-stopped condition by Adaptive Cruise Control. Pre-Collision Braking System First Braking is active. Pre-Collision Braking System The following distance warning is active. Single long beep Repeated short beeps Pre-Collision Throttle Management is active. The “brake more” warning from Adaptive Cruise Control is active. The Lane Departure Warning is active. 6 short beeps The Lane Sway Warning is active. 5 intermittent beeps and 1 long beep 1 short beep The stay-stopped function of Adaptive Cruise Control continued for 2 minutes and the Electronic Parking Brake is automatically applied. Either of the following occurred while Adaptive Cruise Control was set. - A vehicle in front is detected*. - A vehicle in front is no longer detected*. The cruise control mode (Adaptive Cruise Control Conventional Cruise Control) is changed. EyeSight is malfunctioning. Reference page Refer to page 46. Refer to pages 27, 35 and 67. Refer to page 46. Refer to page 49. Refer to page 38. Refer to page 54. Refer to page 57. Refer to page 37. Refer to page 26. Refer to page 62. Refer to pages 71, 72 and 73. EyeSight operation is temporarily stopped. Two-tone beep Lead Vehicle Start Alert is active*. Refer to page 60. *The buzzer that indicates when a lead vehicle is detected or when it is no longer detected (lead vehicle acquisition alert), as well as the Lead Vehicle Start Alert can be turned on or off. * Refer to page 74. 70