Conventional Cruise Control
I Resuming a vehicle speed that was previously stored
A vehicle speed that has been previously set is stored in memory*. To recall and set that
vehicle speed, press the RES/SET switch to the “RES/+”. (The multi information display
shows the set condition again.)
Resume is possible when a vehicle speed was previously set, and the current vehicle speed
is approximately 20 MPH (30 km/h) or more.
30
25
S00606
S00602
* Models for Canada: Metric units are used.
NOTE
The vehicle speed stored in memory is erased at the following times:
- The main cruise control was turned off.
- Either vehicle Dynamics Control or Traction Control Function has been
activated.
- The cruise control mode was switched from Adaptive Cruise Control to
Conventional Cruise Control.
The vehicle will drive at a constant speed that was set between approximately 25 MPH (40 km/h) and 90 MPH (145 km/h).
If there is no vehicle speed in the memory (a previously set vehicle speed),
the vehicle speed cannot be resumed by depressing the RES/+ switch.
69