134
Child Safety Locks
& Valet Mode s02af06
When you choose the valet mode, the alarm system does not operate. In valet mode, the remote transmitter is used only for locking and unlocking the doors and panic activation.
To enter the valet mode, change the setting of your vehicle’ s alarm system to deactivation mode. Refer to“ Alarm System Setting” FP133. The security indicator light will continue to flash once every 3 seconds, indicating that the system is in the valet mode.
To exit valet mode, change the setting of your vehicle’ s alarm system to activation mode. Refer to“ Alarm System Setting” FP133.
2-7. Child Safety Locks
WARNING s02ag
Always turn the child safety locks to the“ LOCK” position when children sit on the rear seat. Serious injury could result if a child accidentally opens the door and falls out.
Each rear door has a child safety lock. When the child safety lock lever is in the“ LOCK” position, the door cannot be opened from inside. The door can only be opened from the outside.
2-8. Windows
WARNING s02ah
To avoid serious personal injury caused by entrapment, always conform to the following instructions without exception.
. When operating the power windows, be extremely careful to prevent anyone’ s body parts or any other objects from being caught in the window.
. Always lock the passengers’ windows using the lock switch when children are riding in the vehicle.
. Always carry the key when you leave the vehicle for safety reasons and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child operating the power window.
NOTE
. If the power window system detects resistance, an impact or abnormality, the window operation may be automatically stopped to prevent