3-10
Instruments and controls / Meters and gauges
To set the trip meter to zero , select the A trip or B trip meter by pressing the TRIP RESET switch and keep the knob pressed for more than 2 seconds .
CAUTION
To ensure safety , do not attempt to change the function of the indicator during driving , as an accident could result .
NOTE
. If the connection between the combination meter and battery is broken for any reason such as vehicle maintenance or fuse replacement , the data recorded on the trip meter will be lost . . If you press the TRIP RESET switch when the ignition switch is in the “ LOCK ”/“ OFF ” or “ ACC ” position , the odometer / trip meter will light up . It is possible to switch between the A trip meter and B trip meter indications while the odometer / trip meter is lit up .
In addition , it is possible to reset the trip meter by pressing and holding the TRIP RESET switch .
The indicators will turn off when : – The TRIP RESET switch is not operated for approximately 10 seconds . – The driver ’ s door is opened and then closed .
& Fuel gauge
S03AD07
1 ) TRIP RESET switch 2 ) Type A combination meter 3 ) Type B combination meter
The fuel gauge is displayed when the ignition is in the “ ON ” position , and it shows the approximate amount of fuel remaining in the tank .
The gauge indication may change slightly during braking , turning or acceleration due to fuel level movement in the tank .
NOTE
. You will see the “ ” sign in the fuel gauge . This indicates that the fuel filler lid is located on the right side of the vehicle . . If you press the TRIP RESET switch while the ignition switch is in the “ LOCK ”/“ OFF ” or “ ACC ” position , the fuel gauge will light up and indicate the amount of fuel remaining in the tank .
The indicators will turn off when : – The TRIP RESET switch is not operated for approximately 10 seconds . – The driver ’ s door is opened and then closed .