44
SEAT , SEATBELT AND SRS AIRBAGS
2 . Unlock the driver ’ s door by pressing the “ ” button or touching the sensor behind the door handle .
3 . Open the driver ’ s door .
S _ 103158-W
A chirp will sound and the seat and angle of the outside mirrors moves to the registered position .
When the select lever is moved to the “ R ” position , the outside mirror will move to the registered reverse tilt-down position .
NOTE
. A retrieved seat position might deviate as the function is used continuously over time .
. A retrieved seat position might deviate if you attempt to continue operating the registered seat in the same direction when the registered seat is already at the farthest possible point of adjustment in any direction .
. If the registered memory position cannot be retrieved after performing the previous procedures , try the following procedures .
( 1 ) Press the “ SET ” button on the
driver ’ s door . ( 2 ) Press the “ ” button on the
access key fob or the door lock
button to lock the doors . ( 3 ) Perform the prior procedures
again .
. If the keyless access function is disabled , the memory position cannot be retrieved by touching the sensor behind the driver ’ s door handle .
However , the memory position can still be retrieved by pressing the “ ” button on the access key fob . For information about how to enable / disable the keyless access function , refer to “ Disabling Keyless Access Function ” FP127 .
. If a new position is registered for the same access key fob , the previously registered memory position data will be deleted .
. If you are carrying 2 or more access keys , seat position retrieval may not be possible .
. If , while carrying an access key , 45 seconds passed after you enter the operating range of the keyless access function , it may not be possible to retrieve the registered memory position even if the door is open . For the operating range of the keyless access function , refer to “ Locking and Unlocking with “ Keyless Access ” Entry Function ” FP120 .
Clearing the registered seat position with access key fob s01aa0307
1 . Close the driver ’ s door .
2 . Hold the access key fob and press and hold the “ SET ” button , then press the “ ” button on the access key fob .
A chirp will sound , and the registered seat position and outside mirror angle on the passenger ’ s side will be cleared .
NOTE
After deleting the seat position , wait for a few moments before registering a new seat position .
HEAD RESTRAINT ADJUST- MENT s01aa04
WARNING
. Never drive the vehicle with the head restraints removed because they are designed to reduce the