SEAT, SEATBELT AND SRS AIRBAGS 45
risk of serious neck injury in the event that the vehicle is struck from the rear. Also, never install the head restraints backwards. Doing so will prevent the head restraints from functioning as intended. Therefore, when the head restraints are removed, all head restraints must be reinstalled properly to protect vehicle occupants.
. All occupants, including the driver, should not operate a vehicle or sit in a vehicle’ s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
. The front seat head restraints are designed to be installed into the front seats only. The rear seat head restraints are designed to be installed into the rear seats only. Do not attempt to install the front seat head restraints into the rear seats, or the rear seat head restraints into the front seats.
Both the driver’ s seat and front passenger’ s seat are equipped with head restraints. Both head restraints are adjustable in the following ways.
Head restraint height adjustment s01aa0401
Head restraint Release button
S _ 103209-W
To raise: Pull the head restraint up. To lower:
Push the head restraint down while pressing the release button.
To remove:
Pull out the head restraint while pressing the release button.
To install:
Press and hold the release button while pushing the head restraint in until it locks in place.
1
S _ 103048-MW
Each head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant’ s ears.
– CONTINUED –