380 STARTING AND OPERATING malfunction.
– Vehicle surroundings are dark
( such as at night). – Ambient temperature outside the
vehicle is high or low. – There is water or humidity on the
lens( such as in rainy weather). – There is foreign material( such as
mud) on or near the camera. – Sunlight or a headlight beam
shines directly shines toward the camera lens.
. Under an artificial light such as a fluorescent lamp, sodium-vapor lamp or mercury lamp, the lighted portion may appear to flicker( flicker phenomenon).
. When the display is cold, the image may leave traces or become darker than usual, causing a difficulty in viewing the screen. When driving your vehicle, make sure that you check your surroundings directly for traffic.
. The following conditions may affect the appearance of the screen, but any resulting image distortion on the screen does not indicate a malfunction.
– When humidity is high on a rainy day, the camera lens becomes
foggy. – When driving at night, the light from
a vehicle or building located ahead shines in the direction of the
camera. – When the vehicle is in a dark place
or when driving at night, the camera image may be adjusted to make image noise less visible. Therefore, the image may look like a monochromatic image or the image colors may differ from the actual colors. The image sharpness in the center and in the four corners of the screen may differ. This is not a malfunction.
3D view
Vehicle icon Vehicle angle icon s07bu0301
S _ 703312-W
The 3D view displays the area around the vehicle.
Top view s07bu0302
S _ 703275-W
Vehicle icon
Predicted course line * *: When the select lever is in the“ R” position.
The top view displays an image of the vehicle’ s surroundings from above the vehicle. This view is useful for checking the vehicle’ s surroundings when you are driving.