Driver Monitoring System 383 |
||||||
1 . When the door is opened and the push-button ignition switch is OFF , the user recognition screen appears and the Driver Monitoring system starts user recognition . The user recognition screen may not appear when the door is opened in some cases , such as when only a short time has passed after the push-button ignition switch was turned OFF . In such cases , user recognition starts when the door is closed however the user recognition screen does not appear . |
2 . Sit in the driver ’ s seat and face forward for a few moments .
3 . When user recognition is completed , the Hello screen appears on the multifunction display .
At this time , the seat position , outside mirror angle , climate control settings , combination meter display basic screen , multi-function display basic screen , and customization settings all change based on the user information .
NOTE
. When a multi-function display operation switch is pressed , the user recognition screen is canceled , however user recognition continues .
|
. When the select lever is not in the “ P ” position , the seat position will not change even when user recognition is completed .
. If user recognition fails , perform recognition again following the instructions , refer to “ When a user is not recognized ” FP384 .
. User recognition is not performed while driving .
. If the seat position or outside mirror angle are in motion at the time when user recognition is completed , then it is not possible to retrieve the seat position , outside mirror angle , or reverse tilt-down outside mirror angle .
. If any of the following operations is performed while retrieving of the seat position or outside mirror angle , retrieving of the seat position and outside mirror angle is canceled . – The power seat adjustment switch was operated . – The outside mirror adjustment switch was operated . – The “ SET ” button was pressed . – The “ 1 ” or “ 2 ” button was pressed . – The select lever was moved to a position other than “ P ” position .
|
Starting and operating |
|||
– CONTINUED – |