|
NOTE
. Press the rear lock button ten times to enter “ 0 ”.
. Change the PIN code frequently to protect your vehicle from theft .
. If you have lent your vehicle to another person , confirm that the PIN code has not been changed or deleted . If the PIN code has been changed or deleted , reregister a new PIN code .
. If you make an error during the registration procedure , press the “ ” or “ ” button on the access key fob . Then , start over from the procedure described in “ Preparation for registering a PIN code ”.
. To protect your vehicle from theft , you cannot register a string of the same five numbers together , such as “ 00000 ”, nor “ 12345 ” as a PIN code .
. Do not register your vehicle license plate number or simple numbers such as “ 11122 ” or “ 12121 ” as a PIN code . Doing so will increase the risk of vehicle theft .
. When you try to register “ 22222 ”, the registered PIN code will be deleted . You cannot unlock the doors by PIN Code Access until a new code is registered .
. After registering a new PIN code ,
|
make sure that you can unlock the doors using the PIN code .
. The PIN code cannot be deleted while the keyless access function is disabled by operating the access key fob .
. Reregister the PIN code in the following cases . – When you forget the PIN code . – When you want to change the PIN code .
! Unlocking
S02AP2103
Perform step 5 described in “ Registration for a PIN code ”.
NOTE
. You cannot unlock by PIN Code Access in the following cases . – When the access key fob is within the operating ranges . – When the ignition switch is in the
“ ACC ” or “ ON ” position .
. If you make an operation error during the unlocking procedure , start over with the unlocking procedure after waiting for 5 seconds or longer .
. To protect your vehicle from theft , a buzzer will sound if incorrect PIN codes are entered five times continuously . If this occurs , you cannot unlock the doors by PIN Code Access
|
for 5 minutes .
& Power saving function
S02AP23
The keyless access function will be disabled in the following cases to protect the access key fob battery and the vehicle battery .
. Case 1 : When the keyless access function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked .
Operate one of the following items to recover the keyless access function :
– Unlock the doors by any procedure other than gripping the front passenger ’ s door handle . – Lock the doors . – Open a door and then close it .
. Case 2 : When the access key fob has been left in the operating range for 10 minutes or longer while all doors are locked .
Operate one of the following items to recover the keyless access function :
– Unlock the doors by gripping the door handle .
– Unlock the doors by pressing the rear gate opener button .
– Lock the doors by touching the door
|
Keys and doors |
|||
– CONTINUED – |