Seats
! Memory function (driver’s seat – if
equipped)
WARNING
. To avoid loss of vehicle control or
personal injury, never perform
the following operations while
driving.
– Adjusting the seat
– Retrieving the seat position
. Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechan-
ism.
. Perform the seat position retrie-
val before driving. Be sure to
confirm that the select lever is in
the “P” position, and the parking
brake is applied, when adjusting
the seat position. Do not drive
until the retrieval of the seat
position is complete.
. When retrieving a registered seat
position, make sure the hands,
feet and possessions of rear seat
passengers are clear of the seat
adjusting mechanism.
! Registration of seat position with
button “1” or “2”
S01AQ060301
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “ON”
position.
. The select lever is in the “P” position.
Some seat positions can be registered.
Register the seat position with button “1” or
“2” or each of the key fobs and retrieve the
seat position.
The following seat positions can be regis-
tered.
. Forward/backward position of the seat
. Angle of the seatback
. Angle of the seat cushion
. Height of the seat
. Angle of the outside mirrors
. Angle of the outside mirrors when the
reverse tilt-down operates.
2. Press and hold the “SET” button, then
press button “1” or “2” to register the seat
position and outside mirror angle.
A chirp will sound once, and the seat
position is registered.
– CONTINUED –
S01AQ0603
. When any unusual conditions or
malfunctions occur during the
retrieval of the seat position, stop
the retrieval of the seat position
by performing any of the follow-
ing.
– Operate any of the power seat
switches.
– Press the “SET” button.
– Press button “1” or “2”.
– Operate the outside mirror
control switch.
37