Subaru Forester Manuals 2018 Forester Owner's Manual | Page 198

3-44 Instruments and controls/Multi function display ! Languages Operate the “ ” or “ ” switch on the steering wheel to display the preferred language. Then pull the “ /SET” switch to select the displayed language. ! EyeSight (models with the EyeSight system) NOTE For models with the EyeSight system, refer to the Owner’s Manual supple- ment for the EyeSight system. After entering the “EyeSight” menu, select one of the following menus. ! BSD/RCTA (if equipped) After entering the “BSD/RCTA” menu, select the “Warning Volume” menu. You can set the volume of the warning buzzer for RCTA (Rear Cross Traffic Alert). You can select “Max”, “Mid”, “Min” or “Off”. ! RAB (if equipped) NOTE For models with the RAB (Reverse Automatic Braking) system, refer to “Reverse Automatic Braking System” F7-67. After entering the “RAB” menu, select one of the following menus. ! Warning Volume The volume of the warning sound that is activated when the RAB (Reverse Auto- matic Braking) system is in operation can be set in 3 stages (“Max”, “Mid” and “Min”). ! Sonar Audible Alarm The RAB (Reverse Automatic Braking) system is equipped with a function that emits a warning sound when the system operates. The function can be activated or deactivated. Select “On” to set the warn- ing sound to active. Select “Off” to set the warning sound to inactive. ! Default Settings Select “Yes” to use the menu screen to restore customized settings to the factory default settings. Select “No” to return to the previous screen without restoring the factory default settings. Multi function display (if equipped) NOTE . If your vehicle is equipped with an information display (monochrome), re- fer to “Information display (Mexico- spec. models)” F3-34. . Illustrations show the display for U.S.-spec. models as an example. For models other than U.S.-spec. models, elements in the illustrations (such as the display indication and measure- ment unit) may be different than the ones for U.S.-spec. models. . When the vehicle is in motion, certain functions and selections may not be available. WARNING Always pay adequate attention to safe driving when operating the multi function display while the vehicle is in motion. When operation of the multi function display is disturbing your awareness and abil- ity to concentrate on driving, stop the vehicle in a safe place before performing operations on the screen. Also, do not concentrate on the display while driving. Doing