Instruments and controls/Multi information display (models with type B combination meter)
Welcome Good-bye Screen By operating the “ ” or “ ” switch on the
steering wheel, you can select the menu.
Pull the “ /SET” switch to enter the
selected menu.
Gauge Initial Movement NOTE
Languages If you enter the “Go Back” menu, the
system will return to the previous
screen.
The menu list is as follows.
Second menu
First menu
Screen Settings
Go Back
EyeSight (models with the EyeSight system)
Warning Volume
Lead Vehicle Acquisition Sound
Lead Vehicle Moving Monitor Function
Go Back
BSD/RCTA (if equipped)
RAB (if equipped)
Warning Volume
Warning Volume
Sonar Audible Alarm
Default Settings
3-43
―
! Screen Settings
After entering the “Screen Settings” menu,
select one of the following menus.
! Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
“On” to activate the screens. Select “Off”
to deactivate the screens.
! Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the “ON”
position can be activated or deactivated.
Select “On” to activate. Select “Off” to
deactivate.
– CONTINUED –