180
Combination Meter Display( Color LCD)
. Once the welcome screen appears, it takes a certain period of time to display it again.
. If the ignition switch is operated after unlocking the driver’ s door, the welcome screen will not appear even when the driver’ s door is opened and closed.
. The welcome screen will disappear when you lock the driver’ s door by using the remote keyless entry system( all models) or the keyless access function( if equipped) while the welcome screen is displayed.
. The welcome screen including the audio / navigation unit can be set to on or off.
. The welcome screen can be set to on or off. For details, refer to“ General settings” FP197( 11.6-inch display models) or“ General settings” FP214( dual 7.0-inch display models).
. The good-bye screen can be set to on or off. For details, refer to“ General settings” FP197( 11.6-inch display models) or“ General settings” FP214( dual 7.0-inch display models).
& Warning Screen s03bn05
Example of warning
If there is a warning message or a maintenance notification, it will appear on combination meter display( color LCD). Take the appropriate actions based on the messages indicated.
& Meter Information Screen s03bn12
The meter information screen can be changed. For details, refer to“ General settings” FP197( 11.6-inch display models) or“ General settings” FP214( dual 7.0-inch display models).
! ECO gauge s03bn1201
The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel |
efficiency as shown in the following chart. |
Displayed unit |
Needle position
“+” side
“ −” side
|
MPG |
Better |
Poorer |
l / 100km |
Poorer |
Better |
NOTE
. The ECO gauge shows only an approximate indication.