234
Light Control Switch
. The locking procedure is performed twice . When performing the unlocking procedure after performing the locking procedure , perform the locking procedure twice again .
* 1 : The setting for the period of time in which the low beam headlights remain on by the welcome lighting function can be changed by a SUBARU dealer . Contact your SUBARU dealer for details . Also , you can change the setting by operating the center information display . For details , refer to “ Car settings ” FP203 ( 11.6-inch display models ) or “ Vehicle setting icons ” FP221 ( dual 7.0- inch display models ).
! Sensor for the auto on / off headlights s03ah0101
The sensor is on the dashboard as shown in the illustration .
CAUTION
If any object is placed on or near the sensor , the sensor may not detect the level of the ambient light correctly and the auto on / off headlights may not operate properly .
& High / Low Beam Change ( Dimmer )
s03ah02
While the light control switch is in the “ ” or “ AUTO ” position in a dark place , the headlights will turn on .
Pushing the lever forward and releasing it will activate the high beam . Pulling the lever rearward and releasing it will switch the headlights to low beam .
When the light control switch is in the “ AUTO ” position , pushing the lever forward turns the High Beam Assist is on .
Refer to “ High Beam Assist Function ” FP235 .
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter is also on .