3-34
Instruments and controls / Combination meter display( color LCD)
& Basic operation
Control switch |
1) |
( Up) |
2) |
/ SET( enter) |
3) |
( Down) |
S03BN01
By operating“” or“” of the control switch, the screens and selection items can be switched. When the“ / SET” switch is pulled toward you, the item can be selected and set.
If there are some useful messages, such as vehicle information, warning information, etc., they will interrupt the current screen, and appear on the display accompanied by a beep. If such a screen is displayed, take proper action according to the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While the“” information reminder is shown on the display, it may be possible to display the warning screen again. To recall the message marked with“” on the display, pull the“ / SET” switch on the steering wheel toward you.
NOTE
When the multi-function display( color LCD) is set to the setting screen, the combination meter display( color LCD) cannot be controlled pressing on the“”,“” and“ / SET” on the control switch.
& Welcome screen( opening animation) and Good-bye screen( ending animation)
S03BN08
When the driver’ s door is opened and closed after unlocking the door, the welcome screen( opening animation) will appear on the combination meter display( color LCD) for approximately 20 seconds.
When the ignition switch is turned to the“ LOCK”/“ OFF” position, the combination meter display( color LCD) gradually turns off with showing Good-bye screen( ending animation).
NOTE
. The welcome screen and the goodbye screen may differ in the actual words and appearance.. Once the welcome screen appears, it takes a certain period of time to display it again.. If the ignition switch is operated after unlocking the driver’ s door, the welcome screen will not appear even when the driver’ s door is opened and closed.. The welcome screen will disappear when you lock the driver’ s door by using the remote keyless entry system( all models) or the keyless access function( if equipped) while the welcome screen is displayed.. The welcome screen including the multi-function display( color LCD)( if equipped) and the audio / navigation unit can be set to on or off. For details, refer to“ Welcome Screen” ☞3-38.