BRZ _ U . book 231 ページ 2022 年 3 月 29 日 火曜日 午後 3 時 59 分
� After the engine starts , the engine speed will be kept high . � Do not shift the select lever ( AT models ) while the starter is cranking . 1 ) Push-button ignition switch
1
702836
When the push-button ignition switch is pressed while depressing the clutch pedal ( MT models ) or the brake pedal ( AT models ), the engine will start . The starting procedure for the engine is as follows .
▼ MT models 1 . Carry the access key fob , and sit in the driver ’ s seat .
2 . Apply the parking brake . 3 . Shift the shift lever to neutral .
4 . Depress the brake pedal and clutch pedal .
5 . While depressing the clutch pedal , press the push-button ignition switch . NOTE
In case the engine does not start by the normal engine start procedure , move the shift lever to the neutral position , and switch the power to “ ACC ”. Depress the clutch pedal , and press the push-button ignition switch for at least 15 seconds . The engine may start . Only use this engine start procedure in case of emergency .