BRZ _ U . book 232 ページ 2022 年 3 月 29 日 火曜日 午後 3 時 59 分
232
Starting and Stopping Engine ■ Stopping Engine 1 . Stop the vehicle completely .
2 . Move the shift lever to neutral ( MT models ) or select lever to the “ P ” position ( AT models ).
3 . Press the push-button ignition switch . The engine will stop , and the power will be switched off . �
WARNING
Do not touch the push-button ignition switch during driving .
When the push-button ignition switch is operated as follows , the engine will stop .
– The switch is pressed and held for 2 seconds or longer .
– The switch is pressed briefly 3 times or more in succession .
When the engine stops , the brake booster will not function . A greater foot pressure will be required on the brake pedal .
The power steering system will not operate either . A greater force will be required to steer , and it may result in an accident .
� If the engine stops during driving , do not operate the push-button ignition switch or open any of the doors until the vehicle is stopped in a safe location . It is dangerous because the steering lock may be activated . Stop the vehicle in a safe place , and contact a SUBARU dealer immediately .
For AT models : �
�
CAUTION
Do not stop the engine while the select lever is in a position other than the “ P ” position .
If the engine is stopped while the select lever is in a position other than the “ P ” position , the power will be in “ ACC ”. If the vehicle is left in this condition , the battery may be discharged .
N
A o s d
■
R F
■
A o d
W lo