BRZ _ U . book 230 ページ 2022 年 3 月 29 日 火曜日 午後 3 時 59 分
230
Starting and Stopping Engine � On rare occasions , it may be difficult to start the engine depending on the fuel and the usage condition ( repeated driving of a distance in which the engine has not warmed up sufficiently ). In such a case , it is recommended that you change to a different brand of fuel . � On rare occasions , transient knocking may be heard from the engine when the accelerator is operated rapidly such as a rapid start-up and a rapid acceleration . This is not a malfunction . � The engine starts more easily when the headlights , air conditioner and rear window defogger are turned off .
■ Starting Engine
�
�
WARNING
There are some general precautions when starting the engine . Carefully read the precautions described in " General Precautions When Starting Engine " �P229 .
If the steering lock cannot be released after the engine has started , never drive the vehicle . The steering is still locked , and it may result in an accident .
CAUTION � If a system malfunction warning message is displayed on the combination meter , there may be a malfunction with the vehicle . Contact a SUBARU dealer immediately .
� If a steering lock warning message is displayed on the combination meter after the engine has started , it means that the steering is still locked . While moving the steering wheel right and left , depress the brake pedal , and press the push-button ignition switch .
� Do not continue pressing the push-button ignition switch for more than 10 seconds . Doing so could cause a malfunction . If the engine does not start , stop pressing the push-button ignition switch . Instead , press the pushbutton ignition switch without depressing the clutch pedal ( MT models ) or the brake pedal ( AT models ) to switch the power status to “ OFF ”. Wait 10 seconds , and then press the push-button ignition switch to start the engine .
N
� ig c p
� th th w ( M m
� n w s
� � th C