|
1 Mode lever 2 Left button 3 Center button 4 Right button
When the warning indicators appear , operate the mode lever to select the mirror mode . In such a case , we recommend that you consult your SUBARU dealer for repair .
If the mode does not change to the mirror mode even when operating the mode lever , the mode lever may have malfunctioned . In such a case , press and hold one of the left , center , or right buttons for 10 seconds . Then the mode will change to the mirror mode .
|
When the camera calibration error , the warning indicators will appear as shown in the illustration .
When the warning indicators appear , operate the mode lever to select the mirror mode . In such a case , we recommend that you consult your SUBARU dealer for repair .
|
1 Camera
. Make sure to clean the Smart Rearview Mirror and the area around the camera regularly . If these parts are not clean , the screen cannot be seen clearly .
. Wipe off the Smart Rearview Mirror and the area around the camera by using a dry soft cloth . If the foreign matter cannot be removed , first wipe the area off using a wet soft cloth , and then wipe using a dry cloth .
. Do not use alcohol , benzine or thinner for cleaning . Doing so could result in discoloration , deterioration , or malfunction .
. Make sure to clean the rear gate glass regularly . When you clean the rear gate
|
Instruments and controls |
|||||
– CONTINUED – |