260
Mirrors
glass , first soak a soft cloth with diluted mild detergent to wipe it off , and wipe using a dry cloth .
. Do not attach stickers on the rear gate glass that is in front of the camera .
. During snowy weather , remove the accumulated snow from around the antenna , because snow interferes with the camera image on the mirror .
. When installing a roof box or a similar accessory , do not block the area in front of the camera lens to avoid interfering with the camera image on the mirror .
! Tips
S03AP1105
. Do not use the display mode for a long time while the engine is not running . Doing so could result in the battery discharge .
. Do not install radio antennas around the Smart Rearview Mirror . Radio waves may disturb the Smart Rearview Mirror screen .
. Observe the following instructions . Not doing so could result in malfunction or the main mirror unit falling off . – Do not push the button too strongly or move the lever too forcibly . – Do not turn the main mirror unit more than 90 degrees . – Do not impact the main mirror unit . – Do not impact the camera or camera cover that are installed on the upper part of the rear gate . . If the screen is hard to see because of light , select the mirror mode .
. If LED lights or scattered reflections are caught in the camera , the screen may flicker . However , this is not a malfunction .
. If something moves rapidly near the camera , the display may not be able to catch the item . However , this is not a malfunction .
. If the display mode is used , the view of the rear will be different from the normal use of the inner mirror or the mirror mode . Do not rely solely on the Smart Rearview Mirror ; check the rear visually if necessary . Pay attention to traffic conditions for safe driving .
. Adjust the brightness of the screen appropriately . If the screen is too bright , the driver ’ s eyes may get tired while driving .
. When it is raining , use the rear wiper . If the screen of the Smart Rearview Mirror is still unclear , even though rear wiper is being used , check the condition of the rubber of the rear wiper blade .
. When using the rear wiper , the screen may flicker when the rear wiper passes through the front of the camera . However , this is not a malfunction .
. If the screen of the Smart Rearview Mirror is not clear , clean the rear gate glass around the camera . If it is still not clear , there is a possibility that the surface of the glass is covered with oil . In this case , remove the oil and clean the glass .
. If the rear gate glass is fogged , use the rear window defogger . Use the mirror mode until the fog is clear completely . For how to use the rear window defogger , refer to “ Defogger and deicer ” FP273 .
. The Smart Rearview Mirror sometimes becomes hot . However , this is not a malfunction .
. In the following cases , the color may not be clear . However , this is not a malfunction . – The shown items are a very far distance away . – The environmental conditions are very dark .