234
Light control switch
& High / low beam change ( dimmer )
S03AH02
1 High beam 2 Low beam
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter is also on .
& Headlight flasher
CAUTION
S03AH03
Do not hold the lever in the flashing position for more than just a few seconds .
To flash the headlights , pull the lever toward you and then release it . The high beam will stay on for as long as you hold the lever .
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter also illuminates .
& High beam assist function
S03AH07
NOTE
. The high beam assist function utilizes the stereo camera installed at the position of the front map lights .
. For details on how to handle the stereo camera , refer to the Owner ’ s Manual supplement for the EyeSight system .
The high beam assist function automatically changes the headlight from high beam to low beam ( or vice versa ).
When all of the following conditions are met , the headlight will change to high beam .
. When the vehicle speed increases to or above 20 mph ( 32 km / h ).
. There is no preceding or oncoming vehicle .
. The forward area of the vehicle is dark . . The road does not have a sharp curve .
When any of the following conditions are met , the headlight will change to low beam .
. When the vehicle speed decreases to or below 10 mph ( 16 km / h ).
. When the forward area of the vehicle is bright .
. When there is a preceding or oncoming vehicle .