Electrical Requirements
IMPORTANT: This refrigerator must be earthed.
Fuse Replacement
If the main lead of this refrigerator is fitted with a BS1363A,
13 A fused plug, to replace a fuse in this type plug use an A.S.T.A.
approved fuse to BS 1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13 A fuse into the fuse cover.
3. Reinsert both the fuse and its cover into the plug.
IMPORTANT: The fuse cover must be refitted when changing a
fuse. If the fuse cover is lost, the plug must not be used until a
correct replacement cover is fitted. A correct replacement is
identified by the colour insert or the colour “word” embossed on
the base of the plug. Replacement fuse covers are available at
your local electrical shop.
A
B
A. Fuse cover
B. Fuse
For the Republic of Ireland:
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the 2-pin,
side earth type.
Socket/Plug
If fitted plug is not suitable for your socket, please contact After-
sales Service for further instruction. Please do not attempt to
change plug yourself. This procedure needs to be carried out
by a qualified technician in compliance with the manufacturer’s
instructions and current standard safety regulations.
Temperature
This refrigerator is designed for operation in places where
temperature comes within the following ranges, according to
climatic class shown on the rating plate. The refrigerator may not
work properly if it is left for a long time at a temperature outside
the specified range.
NOTE: It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
Climatic Class Amb. T. (°C) Amb. T. (°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 16 to 38 From 61 to 100
T From 16 to 43 From 61 to 110
10