THE 37th BANGKOK INTERNATIONAL MOTOR SHOW 2016
22. Construction requirements for each area
Requirements for exhibition area
A1, A2, A3, A5, A7, A9, A11, A15, A17
B (Building) is the area in which opaque decorative parts and double
storey booth not higher than 8.00 meters could be constructed within
the boundary of “B” zone in which the size is vary from each booth,
based on the outline prescribed in each drawing.
W (Wall) is the location where a rear wall of the height not exceeding
7.00 meters could be erected, whereby the wall shall possess enough
strength and stability to stand on its own without supporting base
protruding outside the booth space as this is strictly prohibited.
W1 (Wall 1) is the location where an adjacent wall of the height not
exceeding 3.00 meters could be erected along the designated
adjacent booth boundary line, whereby the wall shall possess enough
strength and stability to stand on its own without supporting base
protruding outside the booth space as this is strictly prohibited. Also,
the company logo installation facing toward other booth is strictly
prohibited.
D (Display) is the shaded area where a portion of which decorative
parts could be constructed, however the opaque decoration is not
allowed. These parts are divided as follows:
1. Automotive stand not higher than 0.80 meter; and
2. Other decorative parts not higher than 2.00 meters, subject to
attractiveness and un-obscure vision of other booths.
F (Floor)
1. Raising the floor from the original floor level is permitted in the
range 0.10 - 0.30 centimeters.
2. After raising the floor, all sharp corners shall be covered with
rubber guard.
3. Booth with raised floor shall have sloped entry and exit walkway