624 8-2. Steps to take in an emergency
5 Remove the valve cap from the valve of the punctured tire.
8 Make sure that the compressor switch is off.
6 Extend the hose. Remove the air release cap from the hose.
You will use the air release cap again. Therefore keep it in a safe place.
9 Connect the power plug to the power outlet socket.( �P. 513)
10Attach the sticker provided with the tire puncture repair kit to a position easily seen from the driver’ s seat.
7 Connect the hose to the valve.
Screw the end of the hose clockwise as far as possible.
11Check the specified tire inflation pressure.
Tire inflation pressure is specified on the label as shown.( �P. 649)