2-2. Charging
105 tor before the start time When the charging mode is set to“ Start”, if you connect the AC charging connector after the set start time, the next charging schedule will be referenced.
When the charging mode is“ Start and stop”, if you connect the AC charging connector after the start time, charging will start immediately and charging will be performed until the stop time.
lAfter connecting the AC charging connector, check that the charging
indicator of the charging port flashes( �P. 82)
lDo not use an outlet that has a
power cut off function( including a charging schedule function)
Use an outlet that constantly supplies electricity. For outlets where the power is cut off due to a charging schedule function, etc., charging may not be carried out according to plan if the power is cut off during the set time.
n When the AC charging connector remains connected to the vehicle
lWhen the charging mode is set to“ Start”, even if multiple consecutive charging schedules are registered, the next charge will not be carried out according to the
charging schedule until the AC charging connector is removed and reconnected after charging
completes. Also, when the traction battery is fully charged, charging according to the charging schedule will not be carried out.
lIf the charging stop time is reached before the traction battery is fully charged and the
charging mode is set to“ Start and stop”, the nearest charging schedule after the stop time is updated as the next charging schedule, and charging is repeated until the battery is fully charged.
nSmartphone-linked operation
After applying to SubaruConnect App, it is possible to use the smartphone application to change charging schedule settings.
nWhen charging schedules are ignored
When the following operations are performed while the charging
schedule is on standby, charging
schedule is temporarily canceled and charging is started.
lWhen turning“ My Room Mode” on( �P. 114)
lWhen turning“ Charge now” on( �P. 106, 109)
lWhen an operation that temporarily cancel charging using the
charging schedule( �P. 94)
nTraction battery heater
( �P. 86)/ Traction battery cooler( �P. 87)
Depending on the temperature of the traction battery, the traction battery heater or traction battery cooler may be activated and the charging indicator may light up while the
charging schedule is waiting for charging.
Setting operations on multi-information display
When operating charging schedule, use the meter control switches.
2
Electric Vehicle system