IMS Ultra Low Temperature Sensor
Sensor Temperature Range
Accuracy
Sensor Series
Notes
-122° to 53°F | -86° to 12°C
± 3°F | ±1.7°C
IMS Solution
Available with NIST Certification
This sensor is designed to connect to the Sensaphone IMS product line and monitor temperatures in refrigerators or freezers. The connection between
the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe can reliably monitor temperatures as low as -122°F (-86°C).
Part Name
Part Number
IMS Solution Ultra Low Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4814
IMS Solution Ultra Low Temperature Sensor & NIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4814-NIST
IMS Ultra Low Temperature Sensor in Glass Bead Vial
Sensor Temperature Range
Accuracy
Sensor Series
Notes
-122° to 53°F | -86° to 12°C
± 3°F | ±1.7°C
IMS Solution
Available with NIST Certification
This glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors,
and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm.
Part Name
Part Number
IMS Solution Ultra Low Temperature Sensor in Glass Bead Vial . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4815
IMS Solution Ultra Low Temperature Sensor in Glass Bead Vial . . . . . . . . . . . . . . . . . . . . . . . . IMS-4815-NIST
IMS Temperature Sensor w/ External Probe
Sensor Temperature Range
Accuracy
Sensor Series
Dimensions
32° to 176°F | 0° to 80°C
± 3°F | ±1.7°C
IMS Solution
2.8” x 1.6” | 72mm x 40mm
Part Name
Part Number
IMS Solution Temperature Sensor w/ External Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4816
www.sensaphone.com
61
IMS Sensors & Accessories
This sensor is designed to connect to the Sensaphone IMS product line and monitor temperatures in areas where a traditional sensor won’t fit. The
electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment
using the included clamp or it may be hung using tie wraps.