14th-Edition-BriskHeat-Product-Catalog A | Seite 119

HOT BONDERS

Your Heating Specialist since 1949

ACR® 3 Hot Bonder
Specifications
General
● Single or dual zone
● 8.4” (213mm) touch screen
● USB port for data transfer (USB flash disk included)
● Input ground fault interrupter breaker protected
● Audible and visual alarms for high and low
temperature / vacuum limits
● Data logs digitally or through built-in printer: prints and
records real-time status of cure including program
parameters
● UL Listed
Power
● Universal input voltage: 100-130VAC, 200-240VAC
● MAINS supply voltage fluctuations up to ±10% of the
nominal voltage
● Transient over voltages typically found on a Category II
power source: i.e. a lighting circuit.
● Frequency: 50-60Hz
● 30 amps maximum per zone

Patent 6,976,519

Temperature Control
● Cures up to 1400°F (760°C)
● 10 thermocouple sensor inputs per zone
● Accepts J-type thermocouple connectors
● Accuracy: ±3°F (1.67°C)
● Monitors all thermocouples for alarms

C O M P O S I T E
CURING

Vacuum
● Dual vacuum system: Built-in electric vacuum pump and
vacuum venturi for each zone
● Pressure: 28” (13.8PSI)
● Ability to manually adjust pressure for each zone

Environment
● Intended for use in dry environments. Do not expose to wet
spray.
● Altitude up to 6562ft (2,000m)
● Storage temperature range: -4 to 140°F (-20 to 60°C)
● Operating temperature range: 41 to 104°F (5 to 40°C)
● Maximum relative humidity: 80% for temperatures up to 88ºF
(31ºC) decreasing linearly to 50% relative to humidity
at 104ºF (40ºC)
● Pollution degree 2 (normally only non-conductive pollution
occurs, however a temporary conductivity caused by
condensation must be expected)

Toll Free: 800-848-7673

Phone: [phone]

w w w .BriskHeat. c o m

Email: [e-mail] Fax: [phone]

© BriskHeat Corporation. All Rights Reserved. 16-03

107