YORK ® AIR-CONDITIONING PRODUCTS
Product Information
Manufacturers are to provide to installers and end users instruction and access to a website that makes available (for free) a
new “Technical Data Sheet” document summarizing the values used for the MEPS (Ƞs,c , SEPR or Ƞs,h) calculation.
Below is an example of the “Technical Data Sheet” as it appears in regulation 2016/2281:
Information requirements for comfort chillers
Model(s): Information to identify the model(s) to which the information relates.
General Information:
Unit name, Air/Water
cooled, type compressor
Outdoor side heat exchanger of chiller: (select which: air or water/brine)
Indoor side heat exchanger chiller: (default: water)
Type: compressor driven vapour compression or sorption process
If applicable: driver of compressor: (electric motor or fuel driven, gaseous or liquid fuel, internal or external combustion engine)
Item
Rated cooling
capacity
Symbol
P rated,c
Value
x,x
Unit Item Symbol Value Unit
kW Seasonal space cooling
energy efficiency Ƞ s,c x,x %
Declared cooling capacity for part load at given outdoor temperature T i
T j = + 35°C
T j = + 30°C
T j = + 25°C
T j = + 20°C
Degradation coefficient
for chillers (*)
Pdc
Pdc
Pdc
x,x
Declared energy efficiency ratio or gas utilisation efficiency/auxiliary
energy factor for part load at given outdoor temperature T i
kW
x,x
kW
x,x
kW
Pdc x,x kW
C dc x,x -
T j = + 35°C EER d or
GUE c,bin /AEF c,bin x,x %
T j = + 30°C EER d or
GUE c,bin /AEF c,bin x,x %
T j = + 25°C EER d or
GUE c,bin /AEF c,bin x,x %
T j = + 20°C EER d or
GUE c,bin /AEF c,bin x,x %
Power consumption in modes other than "active mode"
Off mode P OFF x,xxx kW Crankcase heater mode P CK x,xxx kW
Thermostat off mode P TO x,xxx kW Standby mode P SB x,xxx kW
For air-to-water comfort
chillers: air flow rate,
outdoor measured - x m 3 /h
For air-to-water comfort
chillers: air flow rate,
outdoor measured - x m 3 /h
Mode “On” information:
Capacity, efficiency at
different temperatures for
partial load points A,B,C
and D
Mode “Off” information:
Power input Auxiliaries
(crankcase heater,
stand-by mode, etc)
Other items
Capacity control
Sound power level, outdoor
Emissions of nitrogen
oxides (if applicable)
GWP of the refrigerant
fixed / staged / variable
L WA
NO x (**)
x,x/x,x
x
dB
mg/kWh
input GCV
kg CO 2 eq
(100 years)
Standard rating conditions used: (low temperature application/medium temperature application)
Contact details
Other information:
Sound, GWP, flow rates,
application:
• Floor heating/fancoils
• Fancoils/Chilled beams
Name and address of the manufacturer or of its authorised representative
(*) If C dc is not determined by measurement then the default degradation coefficient of chillers shall be 0.9.
(**) From 26 September 2018
Compliance
All YORK products on the EU market comply with applicable Ecodesign regulations. In many cases YORK products offer
significantly better energy efficiency than required by regulation, resulting in an attractively low cost of operation and lighter
environmental footprint.
91