AGITATING
Lifting Agitation Tank
Principle
The high-speed spinning of the centrifugal impeller produces a negative pressure
in the impeller center, and the cylinder block, at the bottom of the impeller,
sucks the outside ore pulp into the tank, which makes the surface level growing
continuously. When it’s up to a certain level, it will flow out along the overflow
pipe, and then enhances the lifting capability.
Features
Use Xinhai wear-resistant rubber vane;
The height of stirring can be set according to the requirements of the customers.
Application
This kind of equipment can be used the dispersion of the ore pulp is too big because of the equipment configuration, or
the dispersion is too small to pump up.
Technical Parameters
Diameter of Tank Depth
(mm)
Tank (mm)
Model
Effective
Volume
(m³)
TBJ-1000 1000 1266 0.9
TBJ-1250 1250 1510 1.396
TBJ-1500 1500 1800 2.8
TBJ-2000 2000 2000 5.8
TBJ-2500 2500 2500 11.5
Rotating Speed
of Impeller
(r p m) Diameter of
Impeller (mm) 460 300 980 Y132M2-6 5.5 700
460 400 1220 Y160M-6 7.5 780
Height of
Lifting(mm)
Motor Model
Motor Power Weight
(kw)
(kg)
团
集
海
464 450 1470 Y160L-6 11 1022
312 600 1570 Y200L1-6 18.5 3122
310 600 2070 Y225M-8 22 3760
鑫
High-concentration Agitation Tank
Principle
The agitating shaft adopts upper and lower double impeller structure. Under the condition
of the high speed spinning, the upper impeller presses the ore pulp downward, while
the lower impeller lifts the ore pulp up, and the two stands of the ore pulp crushes in
the middle, then spreads to the surrounding, thus the concentration pulp forms a big
circuit in the whole tank and generates the upward stream, which reduces the settling
velocity greatly and improves the stirring capability, in order to adapt the stirring of the
concentration ore pulp.
Features
Use Xinhai wear-resistant rubber vane;
The agitating concentration can be up to 75%.
Application
Used for the backfill stirring of the mortar, or the agitation of the high-concentration ore pulp, such as the thickener
underflow buffer.
Technical Parameters
Model
Effective Volume
(m³)
Rotating Speed
of Impeller (r.p.m)
Diameter of
Impeller (mm) Motor Model
Motor Power
(kw)
Weight
(kg)
BJN-1500×1500 2.2 43 700 XLD4-S-35 4 2500
BJN-2000×2000 4.4 200 900 Y160M-6 7.5 1860
BJN-3000×3000 19.1 160 1300 Y225M-8 22 4660
BJN-4000×4000 46 120 1000 Y250M-8 30 8153
- 49 -