APPLICATION TECHNICAL MANUAL OF
XINHAI MINING MACHINERY PRODUCTS
■ AGITATING
High-efficiency Agitation Tank
Principle
The spinning of the impeller drives the flowing of the ore pulp, which makes the
mineral grains and the reagents mix well.
Features
Bigger diameter impeller and strong agitation capability of the slurry and agent;
Bigger linear velocity impeller and strong agitation capability of the slurry and
agent;
Umbrella-shaped impeller enhances the agitation and circulation capability of the
slurry and agent;
With the agitation capability enhanced, the circulation capability of the slurry
and agent will also be enhanced;
With a baffle equipped in the tank, strong negative pressure is compressed in a limited space which improves the
suction capability and enhances the circulation capability of the pulp and the agent;
团
集
海
The running down pressure of the umbrella-shaped impeller;
Enhances the suction capability and the circulation capability, and further enhances the circulation capability of the
agent and ores with the sprayer equipped at the lower part of the baffle;
Only 100% agent of the ore surface ensures higher index.
Application
Used for the ore pulp stirring before the flotation operation
Technical Parameters
鑫
Model Effective
volume (m³) Rotating Speed of
Impeller (r. p.m) Diameter of
Impeller (mm) Motor Model Motor Power
(kw) Weight
(kg)
GBJ-1000×1000 0.58 530 240 Y112M-6 2.2 548
1.15 350 240 Y100L2-4 3 820
2.2 320 420 Y132M2-6 5.5 1350
4.4 240 560 Y160M-6 7.5 3173
GBJ-1250×1250
GBJ-1500×1500
GBJ-2000×2000
GBJ-2500×2500 9.2 272 560 Y180L-6 15 3939
GBJ-3000×3000 19.1 220 700 Y225S-8 18.5 6676
GBJ-4000×4000 45 153 1000 Y250M-8 37 9560
High-temperature Agitation Tank
Applicable for the ore pulp stirring which need heating and heat preservation, with the peculiar high-temperature
resistant inner and the asbestos insulation materials filled into the interlayer.
Technical Parameters
- 48 -
Model Diameter (mm) Height (mm) Volume (m³) Proportion of Pulp (t/m³) Power (kw) Weight(kg)
SJJ2.5-2.5 2500 2500 11 ≤ 1.6 11 3087
SLL3.5-3.5 3500 3500 30 ≤ 1.4 30 5997