DRYING
TH Series Bucket Lifter
Principle
The bucket scoops materials up from the storage, ascends to the top with conveyor
belt or chain, passes around the top wheel, then turn down, and the bucket lifter will
pour the materials into the receiver tank. The driving belt of bucket lifter applies rub-
ber belt, installed under or on the transmission roller and on both sides of the bend
roller. Generally, there are two parallel transmission chains equipped on the chain
bucket lifter, one side is a pair of driving sprocket, and the other side is band sprocket.
The bucket lifter is equipped with a chassis to prevent the dust floatation in it.
Features
TH series is a kind of circular chain bucket lifter with mixed or gravity discharge and
excavating material loading. The traction parts adopt high quality alloy steel and high
circular chain. The central case has two forms including single channel and double
channels, and is the automatic constant tension of the weight box in the machine. The
chain wheel adopts the changeable combined structure of rim with long service life
and easy change of rims. The lower part applies gravity automatic tensioning device,
which can keep constant tension and avoid slipping or chain-off, and also can effective-
ly protect the components such as the lower shaft when the bucket is blocked caused
by accidental factors.
团
集
海
Application
TH series bucket lifter is suitable for conveying powder, granular and small pieces of materials without wear resistance
or with small wear resistance.
Technical Parameters
Model
TH315
3
Bucket Type (m /h) Zh
Conveying Capacity (mm) 35
鑫
Hopper Width (mm)
Hopper
Chain Hopper
Hopper Volume (L)
TH400
TH630
TH800
TH100
Sh Zh Sh Zh Sh Zh Sh Zh Sh Zh Sh
60 60 94 75 118 114 185 146 235 235 365
6 5.9 9.5 9.3 15 14.6 23.6 23.3 37.5 37.6
315
3.75
TH500
400
500
630
800
1000
Hopper Pitch (mm) 512 688 920
Diameter × Pitch 18×64 22×86 26×92
Circular Number 7 7 7
Number of Chain 2 2 2
Single Breaking Load ＞ 320 ＞ 480 ＞ 570
Pitch Diameter of Chain Wheel (mm)
630
Hopper Running Speed (m/s)
Revolution of Main Shaft (r/min)
710
600
1.1
42.5
900
1000
1.5
37.6
35.8
58
1250
1.6
31.8
30.5
24.4
- 117 -