General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 4010 • VariMill ™ GP
Series 4010 • Uncoated • VariMill GP
Material
Group
P
Side Milling (A) uncoated
Recommended feed per tooth (fz = mm/th) for side milling (A).
A Cutting Speed — vc
m/min
D1 — Diameter
ap ae min max mm 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
0 Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1 Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2 Ap1 max 0,1 x D 112 – 152 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
widia.com
P43
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.