BARNCRAFT ®
DOOR HANDLES
Stainless Steel Pull Handles
The stainless steel handles shown on this page and throughout this catalog are made of real stainless steel . As these handles are all hand-made , their size and appearance will vary slightly . All are packaged with mounting screws .
The VISTA pull ( shown at near left ) and the PROSPECT pull ( far left ) mount on the face of the door . The Vista requires a mortise pocket be machined or chiseled into the door . The PROSPECT is 1 / 4 ” thick , and mounts directly on the door face , and does not require a mortise pocket . The Metro handles extend above the face of the door , and can only be mounted on the door face away from the wall . The Vista or Prospect may be mounted on the “ back ” side of the door . The Metro is mounted with screws from the back side of the door , which will be visible on the back side .
Vista ( Right ) ( 8 ” tall ) - HP4S Prospect ( Left ) 8 ” tall ) - HP26S
The 12 ” and 16 ” Metro pull handles are designed to be mounted with the VISTA or the PROSPECT on the “ back ” side , as the screw holes for each align , but they also may be used separately ( without the Vista or Prospect ).
Refer to our BarnCraft Product & Information Guide for additional specifications and information .
Metro - HP20S ( 12 ” tall ) Stainless Steel
Diameter : 3 / 4 ″ Total Length : 12 ″ Projection : 3 ″
will fit VISTA pull .
Metro - HP48S ( 48 ” tall ) Stainless Steel
Diameter : 1-1 / 4 ″ Total Length : 48 ″ Center to Center Door Mounting Distance : 30 ″ Projection : 3 ″
Metro - HP60S ( 60 ” tall ) Stainless Steel
Diameter : 1-1 / 4 ″ Total Length : 60 ″ Center to Center Door Mounting Distance : 48 ″ Projection : 3 ″
Metro Stainless Steel : Available in 12 ”, 16 ”, 48 ”, or 60 ” tall . The 12 ” and 16 ” will fit the Vista pull to mount together , or they may be used separately .
Metro - HP21S ( 16 ” tall ) Stainless Steel
Diameter : 3 / 4 ″ Total Length : 16 ″ Projection : 3 ″
will fit VISTA pull . www . glasscraft . com | BarnCraft by GlassCraft | 17