BARNCRAFT ®
DOOR HANDLES
Black Pull Handles
The black handles shown on this page are made of real hand wrought iron that is durable , heavy , and complements any design theme , together with your choice of BarnCraft door and sliding hardware . As these handles are all hand-made , their size and appearance will vary slightly . All are packaged with mounting screws .
The VISTA mounts flush with the face of the door , and requires a mortise pocket be cut or chiseled into the door for installation . The PROSPECT is 1 / 4 ” thick , and mounts directly on the door face , and does not require a mortise pocket . The other handles shown below extend above the face of the door , and can only be mounted on the door face away from the wall . The Vista or Prospect may be mounted on the “ back ” side of the door . The 12 ” pull handles directly below are designed to be mounted with the Vista or the Prospect on the “ back ” side of the door , as the screw holes for each align , but they also may be used separately ( without Vista or Prospect ).
Vista ( left , 8 ” tall ) - HP4 Prospect ( right , 8 ” tall ) - HP26
Refer to our BarnCraft Product & Information Guide for more detail .
12 ” Pull Handles for 8 ” Vista or Prospect plate mount
The 5 pull handles at right may be used with or without the Vista pull or Prospect plate , with the 12 ” handle on the front of the door , and the Vista or Prospect on the back side .
24 ” Pull Handles
Vista - HP4 ( 8 ” tall ) shown with Metro pull
Metro HP20 |
Brooklyn HP22 |
Sierra HP23 |
Concord HP24 |
Del Mar HP25 |
Prospect - HP26 ( 8 ” tall ) shown with Metro pull |
12 ” Pull Handles
The 6 pull handles below and the 3 to the left all screw directly into the front face of the door .
Tucson HP1324 |
San Juan HP1624 |
Gila HP1724 |
Tucson HP13 |
San Juan HP16 |
Gila HP17 |
Santa Fe HP1 |
Monterey HP2 |
Corona HP3 |
16