STEP 4:
The pots will have tiny metal tabs on
them that prevent proper mounting.
Snap these off with pliers and mount the
board AND the wah pot. You may need
to do some experimenting to find out
which side of the stereo jack needs the
pot wires and which side needs the
board wires in order for expression to
work properly.
STEP 5:
Attach board wires to their appropriate
places, including the stereo jack, ground
wire and toggle switch and footswitch
connections. Finally solder the last
ground point once you feed the ground
wire to it.
STEP 6:
Solder input and output tip lugs to the
footswitch. Solder lug 9 of the footswitch
now that the two wires are in place.
STEP 7:
You’re done! Feel the funk!
38
DIY //
Build Your Own Maestro Boomer 2