Subaru WRX & WRX STI Manuals 2018 WRX & WRX STI Owner’s Manual | Page 37

Seat, seatbelt and SRS airbags/Front seats
& Power seat (driver’s seat – if
equipped)
2)
3)
4)
5)
justment of the seat, you cannot adjust
the seat cushion angle or seat cushion
height.
Seat cushion angle control switch
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
Seat height control switch
To adjust the seat height, pull up or push
down the rear end of the control switch.
Seatback angle (reclining) control
switch
To adjust the angle of the seatback,
move the control switch.
Lumbar support control switch (dri-
ver’s seat only)
To increase lower back support, push the
front side of the switch. To decrease
lower back support, push the rear side of
the switch.
& Head restraint adjustment
1-5
tioning as intended. Therefore,
when you remove the head re-
straints, you must reinstall all
head restraints correctly to pro-
tect vehicle occupants.
. All occupants, including the dri-
ver, should not operate a vehicle
or sit in a vehicle’s seat until the
head restraints are placed in their
proper positions in order to mini-
mize the risk of neck injury in the
event of a crash.
. The front seat head restraints are
designed to be installed into the
front seats only. The rear seat
head restraints are designed to
be installed into the rear seats
only. Do not attempt to install the
front seat head restraints into the
rear seats, or the rear seat head
restraints into the front seats.
WARNING
1)
Seat position forward/backward con-
trol switch
To adjust the seat forward or backward,
move the control switch forward or
backward. During forward/backward ad-
. Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Also, never install
the head restraints the opposite
way round. Doing so will prevent
the head restraints from func-
NOTE
It is possible to adjust the angle of the
front seat head restraints only. When
installing the front seat head restraints,
make sure that the angle of the head
restraints can be adjusted.
Both the driver’s seat and front passen-
ger’s seat are equipped with head re-
straints. Both head restraints are adjusta-
– CONTINUED –